Instructions

Care and cleaning of the cooking center.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooking center.

Instructions Safety

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape (on some models) must be removed from all chrome trim. It cannot be removed if it is baked on.

Consumer Support Troubleshooting Tips Care and Cleaning Operating

Microwave Oven

Do not use a commercial oven cleaner on any part of your microwave oven.

Removable Turntable and Turntable Support

 

To prevent breakage, do not place the

 

turntable into water just after cooking.

 

Wash it carefully in warm, sudsy water or

 

in the dishwasher.

 

The turntable and support can be

 

broken if dropped. Remember, do not

 

operate the microwave oven without the

 

turntable and support in place.

 

To replace the support, place its center

 

post in the hole. Turn the support

 

around until it seats into place.

 

Inside

 

Keep the microwave oven clean and

 

sweet-smelling. Opening the oven door a

 

few minutes after cooking helps air out

 

the interior. An occasional thorough

 

wiping with a solution of baking soda and

 

water keeps the interior fresh.

 

Spills and spatters are easy to remove

 

from walls and floor if they are wiped up

 

soon after the food is removed. Some

 

spatters wipe up with a paper towel, some

 

may require a damp cloth. Remove

 

greasy spatters with a sudsy cloth, then

 

rinse and dry.

 

Do not clean with metal scouring pads. Pieces

 

can break off the pad, causing electrical shock.

 

Wipe up spatters on the window on the

 

inside of the door daily. When the

 

window is soiled, wash it with a damp

 

cloth. Rinse thoroughly and dry.

 

Wipe metal and plastic parts on the

 

inside of the door frequently. Use a damp

 

cloth to remove all soil.

 

Do not use abrasives, such as cleaning powders

42

or steel and plastic pads. They may mar the

surface.

Outside

Clean the outside of the microwave oven with soap and a damp cloth, then rinse with a damp cloth and dry. Wipe the window clean with a damp cloth. Chrome is best wiped with a damp cloth and then with a dry towel.

Door Surface

When cleaning surfaces of door and oven that come together on closing the door, use only mild, non-abrasive soaps or detergents applied with a sponge or soft cloth.

Page 42
Image 42
GE JT96530 manual Care and cleaning of the cooking center, How to Remove Packaging Tape, Microwave Oven

JT96530 specifications

The GE JT96530 is a cutting-edge jet engine that represents a significant advancement in aviation technology, specifically designed for use in regional and narrow-body aircraft. As the industry continues to evolve towards increased fuel efficiency and reduced emissions, the JT96530 stands out for its performance, state-of-the-art engineering, and innovative features.

One of the main highlights of the GE JT96530 is its high bypass ratio, which contributes to improved fuel efficiency. The engine's design allows for a larger volume of air to bypass the core engine compared to the amount that goes through the combustion chamber. This not only enhances fuel burn efficiency but also reduces noise, making it an environmentally friendly option for airlines and airports. The incorporation of advanced materials, including lightweight titanium and composite components, further optimizes performance and durability while keeping the engine lightweight.

Technologically, the JT96530 is equipped with advanced digital engine controls that enable precise management of engine performance throughout various phases of flight. This system enhances operational efficiency by allowing for real-time monitoring and adjustments, optimizing fuel consumption, and improving overall engine reliability. The engine's design incorporates a staggered fan blade layout, which enhances airflow and further increases efficiency and thrust.

Additionally, the JT96530 features a robust cooling system that ensures parts are maintained at optimal temperatures, enhancing overall engine longevity. The advanced thermal management techniques not only improve performance but also extend maintenance intervals, reducing operational costs for airlines.

The engine’s maintenance is simplified by the modular design, allowing for quick and efficient servicing. Operators benefit from reduced downtime, increasing aircraft availability and overall operational efficiency. The JT96530 is also designed with a focus on sustainability, aligning with global initiatives to decrease carbon emissions in aviation, making it a preferred choice for environmentally conscious operators.

In summary, the GE JT96530 engine combines advanced aerodynamics, innovative materials, and state-of-the-art technology, setting a new standard in the aviation industry. Its remarkable efficiency, reduced environmental impact, and ease of maintenance make it an ideal choice for airlines looking to modernize their fleet while meeting the demands of a rapidly changing world. This engine not only delivers exceptional performance but also reflects a commitment to sustainable aviation for the future.