GE JT96530 Instructions Care and Cleaning, Instructions Operating, Auto Recipe Conversion, Safety

ge.com

Safety

+	Tones at the End of a Timed Cycle
	At the end of a timed cycle, 3 short beeps will
	sound followed by one beep every 6 seconds until
	the CLEAR/OFF pad is pressed. This continuous
	6-second beep may be canceled.
	To cancel the 6-second beep:
	Press the BAKE and BROIL HI/LO
	pads at the same time for 3 seconds
	until the display shows SF.

Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the START pad.

Instructions Operating

+	12-Hour, 24-Hour or Clock Blackout
	Your control is set to use a 12-hour clock.
	If you would prefer to have a 24-hour
	military time clock or black out the clock
	display, follow the steps below.
	Press the BAKE and BROIL HI/LO
	pads at the same time for 3 seconds
	until the display shows SF.

Press the CLOCK pad once. The display will show 12 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to change to the 24-hour military time clock. The display will show

24 hr. If this is the choice you want, press the START pad.

Press the CLOCK pad again to black out the clock display. The display will show OFF. If this is the choice you want, press the START pad.

NOTE: If the clock is in the black-out mode, you will not be able to use the Delay Start function.

Instructions Care and Cleaning

	Auto Recipe™ Conversion
+	When using convection bake, the Auto Recipe™
	Conversion feature will automatically convert
	entered regular baking temperatures to
	convection baking temperatures.

This feature is activated so that the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START pad, the display will show CON

and the converted temperature of 325°F.

NOTE: This feature does not convert convection bake cooking times, only regular baking temperatures.

To deactivate the feature:

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.

Press the CONVECTION BAKE MULTI/ 1 RACK pad. The display will show CON ON. Press the CONVECTION BAKE MULTI/1 RACK pad again. The display will show CON OFF.

Press the START pad.

To reactivate the feature, repeat steps 1–3 above but press the START pad when CON ON is in the display.

Troubleshooting Tips Consumer Support

25