Instructions

Using the lower convection oven.

How to Set the Oven for Convection Roasting when Using the Probe

and Cleaning Operating Instructions Safety

For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven.

The display will flash PROBE and the oven control will signal if the probe is inserted into the outlet, and you have not set a probe temperature and pressed the START pad.

Place the rack in the position that best centers the food in the oven. Insert the probe into the meat.

Plug the probe into the outlet in the oven. Make sure it is pushed all the way in. Close the oven door.

Press the CONVECTION ROAST pad.

Press the number pads to set the desired oven temperature.

Press the PROBE pad.

Press the number pads to set the desired internal meat temperature.

Press the START pad.

When the oven starts to heat, the word LO will be in the display. After the internal temperature of the meat reaches 100°F, the changing internal temperature will be shown in the display.

When the internal temperature of the meat reaches the temperature you have set, the probe and the oven turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the cooking center.

NOTE:

If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

You can use the timer even though you cannot use timed oven operations.

Consumer Support Troubleshooting Tips Care

To change the oven temperature during the Convection Roast cycle, press the CONVECTION ROAST pad and then press the number pads to set the new desired temperature.

Convection Roasting Guide

Meats

 

 

Minutes/Lb.

Oven Temp.

Internal Temp.

Beef

Rib, Boneless Rib,

Rare

20–24

325°F

140°F†

 

Top Sirloin

Medium

24–28

325°F

160°F

 

(3 to 5 lbs.)

Well

28–32

325°F

170°F

 

Beef Tenderloin

Rare

10–14

325°F

140°F†

 

 

Medium

14–18

325°F

160°F

Pork

Bone-in, Boneless (3 to 5 lbs.)

 

23–27

325°F

170°F

Ham

Canned, Butt, Shank (3 to 5 lbs. fully cooked)

14–18

325°F

140°F

Lamb

Bone-in, Boneless (3 to 5 lbs.)

Medium

17–20

325°F

160°F

 

 

Well

20–24

325°F

170°F

Poultry

Whole Chicken (212 to 312 lbs.)

 

24–26

325°F

180°–185°F

 

Cornish Hens, Unstuffed (1 to 112 lbs.)

 

50–55 total

325°F

180°–185°F

 

Stuffed (1 to 112 lbs.)

 

55–60 total

325°F

180°–185°F

 

Duckling (4 to 5 lbs.)

 

24–26

325°F

180°–185°F

 

Turkey, whole*

 

 

 

 

 

Unstuffed (10 to 16 lbs.)

 

8–11

325°F

180°–185°F

 

Unstuffed (18 to 24 lbs.)

 

7–10

325°F

180°–185°F

 

Turkey Breast (4 to 6 lbs.)

 

16–19

325°F

170°F

*Stuffed birds generally require 30–45 minutes additional roasting time. Shield legs and breast with foil to prevent over-browning and drying of skin.

The U.S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only 140°F means some food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)

36

Page 36
Image 36
GE JT96530 manual Convection Roasting Guide, Press the Convection Roast pad

JT96530 specifications

The GE JT96530 is a cutting-edge jet engine that represents a significant advancement in aviation technology, specifically designed for use in regional and narrow-body aircraft. As the industry continues to evolve towards increased fuel efficiency and reduced emissions, the JT96530 stands out for its performance, state-of-the-art engineering, and innovative features.

One of the main highlights of the GE JT96530 is its high bypass ratio, which contributes to improved fuel efficiency. The engine's design allows for a larger volume of air to bypass the core engine compared to the amount that goes through the combustion chamber. This not only enhances fuel burn efficiency but also reduces noise, making it an environmentally friendly option for airlines and airports. The incorporation of advanced materials, including lightweight titanium and composite components, further optimizes performance and durability while keeping the engine lightweight.

Technologically, the JT96530 is equipped with advanced digital engine controls that enable precise management of engine performance throughout various phases of flight. This system enhances operational efficiency by allowing for real-time monitoring and adjustments, optimizing fuel consumption, and improving overall engine reliability. The engine's design incorporates a staggered fan blade layout, which enhances airflow and further increases efficiency and thrust.

Additionally, the JT96530 features a robust cooling system that ensures parts are maintained at optimal temperatures, enhancing overall engine longevity. The advanced thermal management techniques not only improve performance but also extend maintenance intervals, reducing operational costs for airlines.

The engine’s maintenance is simplified by the modular design, allowing for quick and efficient servicing. Operators benefit from reduced downtime, increasing aircraft availability and overall operational efficiency. The JT96530 is also designed with a focus on sustainability, aligning with global initiatives to decrease carbon emissions in aviation, making it a preferred choice for environmentally conscious operators.

In summary, the GE JT96530 engine combines advanced aerodynamics, innovative materials, and state-of-the-art technology, setting a new standard in the aviation industry. Its remarkable efficiency, reduced environmental impact, and ease of maintenance make it an ideal choice for airlines looking to modernize their fleet while meeting the demands of a rapidly changing world. This engine not only delivers exceptional performance but also reflects a commitment to sustainable aviation for the future.