IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of

California to publish a list of substances known to the state to cause birth defects or other reproductive

harm, and requires businesses to warn customers of potential exposure to such substances.

• The fiberglass insulation in self-cleaning ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure

can be minimized by venting with an open window or using a ventilation fan or hood.

When using electrical appliances, basic safety precautions should be followed, including the following:

Use this appliance only for its intended use as described in this guide.

Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided Installation Instructions.

Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

Before performing any service, DISCONNECT THE OVEN POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY

REMOVING THE FUSE OR SWITCHING OFF

THE CIRCUIT BREAKER.

Do not leave children alone--Childrenshould not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

.Do not allow anyone to climb, stand or hang on the door. They could damage the oven or cause severe personal injury.

CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE AN OVEN. CHILDREN CLIMBING ON THE OVEN TO REACH ITEMS COULD BE SERIOUSLY INJURED.

Do not store flammable materials in an oven.

Teach children not to play with the controls or any other part of the oven.

Never leave the oven door open when you are not watching the oven.

Always keep combustible wall covering, curtains or drapes a safe distance from your oven.

Never wear loose-fitting or hanging garments

while using the appliance. Be careful when reaching for items stored in cabinets over the oven. Flammable material could be ignited if

brought in contact with hot heating elements and

may cause severe burns.

DO NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER

FLAMMABLE VAPORS AND LIQUIDS 1N THE VICINITY OF THIS OR ANY OTHER

APPLIANCE.

•Useor damponly potdryholderspotholdersonhot--Moistsurfaces may result in burns from steam. Do

not let pot holders touch hot heating elements. Do not use a towel or other bulky cloth. Such cloths can catch fire on a hot heating element.

Always keep dish towels, dish cloths, pot holders and other linens a safe distance from

your oven.

Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

For your safety, never use your appliance for warming or heating the room.

flammable materials accumulate in •Do not let cooking grease or other

or near the oven.

• Be sure the oven is securely installed in a cabinet that is firmly attached to the house

structure. Never allow anyone to climb, sit or stand on the oven door.

Do not use water on grease fires. Smother fire or flame or use a multi-

purpose dry chemical or foam-type fire extinguisher.

Flame in the oven can be smothered completely

by closing the oven door and turning the oven off

or by using a multi-purpose dry chemical or foam- type fire extinguisher.

(continued next'page)

3

Page 3
Image 3
GE JTP14, JTP13 warranty Important Safety Instructions, Do not store flammable materials in an oven, May cause severe burns

JTP14, JTP13 specifications

The GE JTP13 and JTP14 engines represent significant advancements in the field of gas turbine technology, primarily used in commercial jet applications. Both models are known for their robust performance, reliability, and efficiency, making them popular choices among aircraft manufacturers and operators.

The GE JTP13 engine is a turbojet engine that gained prominence for its lightweight design and high thrust-to-weight ratio. It features a single spool, axial-flow configuration that maximizes efficiency and minimizes drag. One of the standout characteristics of the JTP13 is its advanced aerodynamics, which has been optimized through extensive computational fluid dynamics modeling. This results in enhanced performance across a wide range of flight conditions.

Technology-wise, the JTP13 incorporates a dual-combustor system that improves fuel combustion efficiency. This feature not only enhances thrust output but also reduces emissions, aligning with modern environmental standards. Additionally, the engine's materials are chosen for high durability, ensuring longevity and lower maintenance costs. The JTP13's simplicity in design facilitates ease of maintenance, a crucial aspect for operators aiming to minimize downtime.

Meanwhile, the GE JTP14 engine builds upon the advancements made in the JTP13, offering several upgraded features. One of its key characteristics is the increased thrust capability, catering to larger airframes and higher payload requirements. The JTP14 retains a single-spool design but introduces innovations in blade cooling technology, enabling the engine to operate efficiently at higher temperatures, thus further improving its thermal efficiency.

The JTP14 also employs advanced digital engine control systems, enhancing overall performance management and fuel efficiency. These systems allow real-time adjustments based on changing flight conditions, providing operators with a responsive engine that can adapt to various demands. The engine's noise reduction technologies further contribute to its appeal, making it a quieter option for both passengers and the surrounding environment.

In summary, the GE JTP13 and JTP14 engines exemplify cutting-edge engineering in the aviation industry. Their design characteristics, coupled with advanced technologies, pave the way for operational efficiency, reduced environmental impact, and enhanced performance, securing their place in the future of commercial jet propulsion.