Instructions
Special features of your oven control.
Instructions Safety
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6 second beep may be canceled.
To cancel the 6 second beep:
Press the BAKE and BROIL HI/LO pads (on double oven models use the upper oven controls) at the same time for 3 seconds until the display shows SF.
Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Press the START pad.
NOTE: On double oven models this cancels the end of cycle tone for both ovens.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Celsius selections.
Press the BAKE and BROIL HI/LO pads (on double oven models use the upper oven controls) at the same time for 3 seconds until the display shows SF.
Press the BROIL HI/LO pad. The display will show F (Fahrenheit).
Press the BROIL HI/LO pad again. The display will show C (Celsius).
Press the START pad.
NOTE: On double oven models the new setting will be displayed for both ovens.
Troubleshooting Tips Care and Cleaning Operating
Cook and Hold
Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.
To activate this feature, follow the steps below.
On double oven models both ovens follow the same step 1. Then proceed with steps 2 through 3, using the pads for the upper or lower oven.
Press the BAKE and BROIL HI/LO pads (on double oven models use the upper oven controls) at the same
time for 3 seconds until the display shows SF.
Press the COOKING TIME pad. The display will show Hld OFF.
Press the COOKING TIME pad again to activate the feature. The display will show Hld ON.
Press the START pad to activate the cook and hold feature and leave the control set in this special features mode.
Customer Service
Using Convection Conversion
By using the Convection Conversion feature you can automatically convert the oven temperature from regular baking to Convection Bake temperatures.
To convert the oven temperature for convection baking, follow the steps below.
Press and hold the CONVECTION
BAKE pad for 4 to 5 seconds.
CON Con Bake will show in the display.
Using the number pads, enter
8the temperature recommended in the recipe.
Press the START pad.
The display shows the converted (reduced) temperature. For example, if you entered a recipe temperature of 350°F., the display will show 325°F. when it is converted.
Press the CLEAR/OFF pad when baking is finished.
NOTE: Conversion must be set each time you want to use it. It is not held in memory.