GE JVM142K How To Use The M~Ute/Seco~ T~Er, The Minute/Second Timer, Using a Holding Time, I &Ii

HOW TO USE THE M~UTE/SECO~ T~ER

The Minute/Second Timer

The Minute/Second Timer has 3 timing functions:

●It operates as a minute timer.

●It can be set to delay cooking.

●It can be used as a hold setting after defrosting.

The Minute/Second Timer operates without microwave energy.

Using a Holding Time

The Minute/Second Timer can also be used to program a “holding time” between microwave cooking functions. The time can range from 1 second to 99 minutes and 99 seconds. A holding or standing time may be found in some of your own recipes or in a cookbook.

How to Time a 3-Minute Phone Call Programming Delayed Cooking

Step 1: Touch MIN/SEC TIMER pad.

Step 2: Touch number pad 3 and MINUTE pad (for 3 minutes and no seconds).

Step 3: Touch START. Display shows time counting down. The timer signals when time is up.

To delay cooking up to 99 minutes and 99 seconds, touch either TIME COOK I & II, TEMP COOW HOLD or AUTO ROAST and enter cook time, temperature or code. Touch MIN/SEC TIMER and enter number of minutes to delay cooking. When delaying Temp Coo~old or Auto Roast cooking, be sure probe is in food. Touch START. Timer will count down to O and cooking will begin.

How to Defrost, Hold and Time Cook

Let’s say you want to defrost a frozen casserole for

15 minutes, hold for 10 minutes and then Time Cook for 25 minutes. Here’s how to do it:

Stepn1: Take casserole from freezer and place in oven. Step 2: Touch TIME

TIME DEFROST pad.

DEFROST

Step 3: Touch pads 1,5

and MINUTE for 15 minutes

H defrosting time. (Defrosting is automatically set on power level 3 but can be changed by touching the POWER LEVEL pad and the desired power level.)

Step 4: Set standing or hold

MIN/SEC time by touching MIN/SEC TIMER pad.

TIMER

Step 5: Touch 1,0 and MINUTE to hold for 10 minutes.

Step 6: Touch TIME

TIME COOK COOK I &11 pad.

I &II

Step 7: Touch 2, 5 and MINUTE for 25 minutes of cooking time.

Step 8: Touch START. As each function is automatically

I START performed, oven display shows instructions entered and the function. When time is up, the oven signals and flashes “End.”

10