GE JVM142K, JVM140K, JVM141K To Remove Charcoal Filter, To Install Charcoal Filter

To Remove Charcoal Filter

‘;’’’’’’’’”disconnect power m at main fuse or

circuit breakeru panel or pull plug. Remove the top

grille by taking off

2 screws which hold it in place. Grasp filter and slide toward front of oven. It will slide right out.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. (Fig. 1)

WARNING–Improper useof the grounding plug can result in a risk of electric shock.

Consult a

PREFERRED

qualifiedMETHOD

electrician I or service technician if

the grounding instructions are

not completelyEnsure proper ground

To Install Charcoal Filter

To install a new filter, remove plastic and other outer wrapping from the new filter. Insert filter into top opening of oven as shown.

It will rest at an angle on 2 side support tabs and in front of right rear tab. Replace grill and secure with 2 screws.

Where a standard 2-prong wall receptacle is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall receptacle.

Do not under any circumstance cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug with this appliance.

Do not use an extension cord with this appliance.

understood, or

Fig. 1 exists before use

if doubt exists as to whether the appliance is properly grounded.

31