GE JVM239 en Li@t, Be sw btibs to, be replaced are cool, or pti pi~, To mpb your oven light

or pti pi~ REMOV; =REW

Remove screw on right side of light co~nt cover and lower cover until it stops.

Be sw btibs to
be replaced are cool
before removing.
B* tie adhesive
d by gendy	\	\
unscrewtig the
		\
bulbs. Replace with

@watt incandescent

bulbs ~~X4253) available from your GE supplier. Wgh intensity @watt bulbs (4S1 IN/1), which are available in supermarkets and Hwam stores, may dso be used for replacements. Raise light compartment cover and replace screw. tinnect electrical power to rnimwave oven.

&en Li@t

To mpb your oven light,

firSt *M- ~WM at h

&or -t beer pd or pti pl~ Remove the top grill by taking out the 2 screws that hold it h place.

Next, remove the single screw located above door n= ~ter of oven that secures light housing. Replace burned-out bulb with a 30watt incandescent bulb ~=4235), avaikble tim your GE supplier.

~ean off the grease and dust on hood surf- ofin. Use a solution of warm wster md detergent. About 1 tablapoon of ~onia may be added to the water. Take

-not to touch the filters and enamel surfaces witi this solution; ammonia will darken *.