GE 49-8391 Light B~B Mplace~Nt, Cooktop Ligh~ight Light, Oven Light, To replace, disconnect power

LIGHT B~B MPLACE~NT

Cooktop Ligh~ight Light

To replace
combination	~1,
cooktop/night	Illui
	—
light, first
	L
disconnect power	\L-
at main fwe or	\
circuit breaker
	REMOVE SCREW
panel or pull plug.

Remove screw on right side of light compartment cover and lower cover until it stops.

Be sure bulbs to be replaced are cool before removing. Bre~ the adhesive seal by gently unscrewing the bulbs. Replace with 40-watt

incandescent bulbs (WB02X4253) available from your GE supplier. High intensity 40-watt bulbs

(40S 11 N/l), which are available in supermarkets and hardware stores, may also be used for replacements. Raise light compartment cover and replace screw. Connect electrical power to microwave oven.

Oven Light

r

To replace your oven light, first disconnect power at main fuse or circuit breaker panel or pull plug. Remove the top grill by

t~ing out the 2 screws that hold it in place.

Next, remove the single screw located above door near center of oven that secures light housing. Replace burned-out bulb with

a30-watt incandescent bulb (WB02X4235), available from your GE supplier.

Clean off the grease and dust on hood surfaces often. Use a solution of warm water and detergent. About 1 tablespoon of ammonia may be added to the water. Take care not to touch the filters and enamel surfaces with this solution; ammonia will darken metal.

30