GE JVM240BL, JVM241WL, 49-8391 T~ Ex~Ust Feature, GRO-~G mSTRUCTIONS, To Remove Charcoal Filter

Models: 164 D2588P191 49-8391 JVM241WL JVM240BL

1 36
Download 36 pages 62.38 Kb
Page 32
Image 32
T~ EX~UST FEATURE

T~ EX~UST FEATURE

(continued)

To Remove Charcoal Filter

To remove the charcoal filter, disconnect power at main fuse or circuit breaker panel or pull plug. Remove the top grille by

takin~ off 2 screws which hold it in place. Grasp filter and slide toward front of oven. It will slide right out.

To Install Charcoal Filter

To install a new filter, remove plastic and other outer wrapping from the new filter. Insert filter into top opening of oven as shown.

It will rest at an angle on 2 side support tabs and in front of right rear tab. Replace grill and secure with 2 screws.

GRO-~G mSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. (Fig. 1)

WARNING–Improperuseofthe grounding plug can result in a risk of electric shock.

Consult a qualified electrician or service technician if the grounding instructions are

not completely

Fig. 1

Ensure proper ground

understood, or

exists before use

 

 

if doubt exists as to whether the appliance is

properly grounded.

 

 

Where a standard 2-prong wall receptacle is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wdl receptacle.

Do not under any circumstance cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug with this appliance.

Do not use an extension cord with this appliance.

32

Page 32
Image 32
GE JVM240BL, JVM241WL, 49-8391 T~ Ex~Ust Feature, GRO-~G mSTRUCTIONS, To Remove Charcoal Filter, To Install Charcoal Filter