GE GSD6300 Control Panel Features, Control Settings, Profile Models, Status Indicator Lights, 4

Control Panel Features

Profile Models

Throughout this manual, features and appearance may vary from your model.

1

3

6
		TIME REMAINING
5	4	2

Control Settings

1	Status Indicator Lights
	The Status display tells you what’s happening while the dishwasher is in operation and may flash,
	indicating a malfunction (see page 86). The lights will come ON indicating the sequence of
	operation the dishwasher is in.
	SENSING	Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water.
		The dishwasher will adjust the selected cycle to achieve optimal performance.
	WASHING Displayed during prewash and main wash periods.
	RINSING	Displayed during rinse periods.
	DRYING	Displayed during HEATED DRY.
	SANITIZED	Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.
	CLEAN	Displayed when a wash cycle is complete. The light will remain ON until door is opened.
	Time Remaining Display (on some models)
2
	Displays the minutes remaining until the cycle is complete. The display may adjust the remaining
	time while the Sensing light is on.
	Selections
3
	The light above the selected pad will be ON to indicate which WASH CYCLE has been selected.

ANTI-BACTERIA Heavy 10.0 gal., 93 min.

Medium 8.6 gal., 90 min.

Light 7.2 gal., 90 min.

This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water.

NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

– 4 –