ELECTRONIC MONITOR & DIAGNOSTIC SYSTEM
(TFJ30PF, TFJ28PF, TPJ24PF)
4 | 1 | 3 | 5 | 6 |
7 | 7 | 2 |
5The diagnostic codes displayed below will flash to indicate the following warnings:
“FF” Check food stored in the freezer compartment. “PF” Power failure.
“CI” Icemaker malfunction. “dE”Defrosting system malfunction.
6To perform the 4 coded performance tests, push this key lightly.
1Light will flash if any door is left open.
2Light will come on when the system is set to sound an alarm if a door is left open more than 30 seconds.
3Light will come on and warn if the temperature in the freezer compartment rises higher than normal.
4Light will come on if the diagnostic system determines there is no problem.
7These keys allow the following selections:
COLD WATER CRUSHED ICE ICE CUBES
Operation
1 DOOR-LEFT-OPEN MONITOR
• If the freezer or the refrigerator compartment door is left open more than 6 mm, a red light will flash until the door is completely closed.
2
KEY TO SET “DOOR-LEFT-OPEN WARNING”
•To set the
•If the freezer or the refrigerator compartment door is left open more than 30 seconds while this warning is set, a continuous “beep” will sound until the door is completely closed.
•To stop the warning sound, push the key once to release setting. The green light will also go out.
3
REFRIGERATOR INTERIOR TEMPERATURE MONITOR
•If the interior temperature of the freezer compartment remains unusually high for a long period of time
CAUTION: When the refrigerator is first plugged in, the red light will stay on for several hours until the interior temperature goes down. This is not a malfunction. In order to allow the temperature to cool faster, do not open the door. In addition, the red light may come on if the freezer door is left open and the interior temperature goes up. If this occurs, and in order to lower the interior temperature as quickly as possible, do not open the door.
27
