Installation Instructions
7TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT (CONT.)
8TRANSFER FREEZER DOOR HANDLE TO THE RIGHT
Transfer the door plug
button to the oppositeButton
side.
1
Reinstalling the handle: Attach the handle to the right side of the door.
Plastic handle: | 2 |
Line up the handle with the | |
screw holes in the top of the door | |
and tighten the screws. | Install the |
screw into the bottom of the handle. | |
Plastic handle:
Remove the screws holding the handle to the top and bottom of the door. 
Remove handle. 
Move the plug button on the right side of the door to the handle screw hole on the left side.
13
Plug
Button
2
Reinstall the handle plug. |
| |
|
| 3 |
|
| 4 |
|
| Handle |
|
| Plug |
Stainless steel handle | 2 | |
(on some models): |
| |
Attach the handle | 1 | |
to the fastener and | ||
tighten with the 3/32″ |
| |
Allen wrench |
|
|
(supplied). | Line |
|
up the handle with the screw holes in the top of the door and tighten the screws.
Stainless steel handle |
|
| |
(on some models): |
|
| |
Remove the two |
|
| |
screws holding the |
|
| |
handle to the bottom |
|
| |
of the door. Loosen the | 2 |
| |
set screw with the | 3 | ||
3/32″ Allen wrench |
|
| |
(supplied) and remove | Fastener |
| |
the handle. |
|
| |
Remove the handle |
|
| |
fastener with the 3/16″ |
| 1 | |
Allen wrench |
|
| |
|
|
| |
(supplied). | Transfer |
|
|
the fastener to the right side and move the GE badge to the left side of the freezer door. Remove the paper covering on the adhesive backing prior to attaching the badge to the door.
Reattach the handle on the opposite side using the holes closest to the edge of the door.
Plastic handle:
Line up the handle with the screw hole in the top of the door and tighten screw. 
Install the two screws into the bottom of the handle. 
Move the plug button on the right side of the door to the handle screw hole on
1
3
Plug
Button
2
17
