GE ZSC1202SS Assembly Instructions, Tools Required, GE Consumer & Industrial Appliances

GE Consumer & Industrial Appliances

Assembly Instructions

Advantium® Built-In Accessory Storage Drawer JX2200, JX2201, ZX2201

BEFORE YOU BEGIN

Read these instructions completely and carefully. Read the Installation Instructions for the Advantium 120V or 240V oven completely and carefully for cutout dimensions and step-by-step instructions.

IMPORTANT— Save these instructions for local inspector’s use.

IMPORTANT— Observe all governing codes and ordinances.

•NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer.

•NOTE TO CONSUMER: Keep these instructions with your Advantium 120V or 240V Oven Owner’s Manual for future reference.

•SKILL LEVEL: Installation of this appliance requires basic mechanical skills.

•COMPLETION TIME: One hour with the installation of an Advantium 120V or 240V oven.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty. See the Advantium 120V or 240V Oven Owner’s Manual for warranty information.

MODELS AVAILABLE

Profile Models:

JX2200BB–Black

JX2201SS–Stainless Steel

Monogram Models:

ZX2201SS–Stainless Steel (for installation above 36″ only)

NOTE: Advantium 240V model ZSC2202SS and Advantium 120V model ZSC1202 CANNOT be installed with an accessory storage drawer. See Installation Preparation Without an Accessory Storage Drawer in the Installation Instructions for these models.

PRODUCT DIMENSIONS AND CLEARANCES

5″

Allow 15″ clearance

when fully open

NOTE: Appearance will vary by model.

TOOLS REQUIRED

• #2 Phillips screwdriver

PARTS SUPPLIED

•2 Side Supports

•Screws (8)

•Screws (color-matched) (5)

•Under-the-Counter Mounting Bracket (1)

16