Installation Instructions
4 INSTALL BOTTOM TRIM
CAUTION:If installing the Advantium 120V Oven below 36″, you must use the plastic bottom trim due to burn risk to children. The plastic trim acts as insulation and will help prevent burns to children from hot surfaces.
NOTE: If installing the Advantium 120V Oven
with an accessory storage drawer, the bottom trim is not required. Proceed to Step 5.
•Installation Below 36″, align trim tabs on the plastic trim to slots in the bottom of the oven.
Plastic Trim
•Installation Above 36″, align trim tabs on the plastic or metal trim to slots in the bottom of the oven.
Plastic Trim
OR
Metal Trim
•Secure the bottom trim to the bottom of the oven using 3 screws provided.
6 INSTALL MOUNTING SCREWS
•Slide the oven the remaining way into the opening so that the side flanges and control panel are against the cabinet frame. Make sure that the oven is centered in the opening.
•Open the door, place a turntable tray in the oven and make sure that the tray in the unit is level.
•Drill pilot holes through the side flanges.
•Drive the
If installing oven with an accessory storage drawer:
•Open the drawer.
•Drill pilot holes through the side flanges.
•Drive
NOTE: If installing the Profile Advantium 120V Oven with an accessory storage drawer, you must use the
If installing the Monogram Advantium integrated model ZSC1201 above 36″, the UTC mounting bracket for the accessory storage drawer must be used.
5INSTALL BOTTOM TRIM WITH ACCESSORY DRAWER
If installing with an accessory drawer, see installation instructions on page 17 or instructions that come with the accessory drawer.
7FINALIZE INSTALLATION
•Turn power on at the source. The interior light should come on when the door is opened.
•Refer to Owner’s Manual for operating instructions.
15