GE PRODUCT DIMENSIONS AND CLEARANCES FOR 48” MODELS

Design Information

PRODUCT DIMENSIONS AND CLEARANCES FOR 48” MODELS

47-7/8”Width

WARNING:

Installations without a hood

require 48" minimum to combustibles above the rangetop. A custom hood installation with exposed horizontal combustible surfaces must have

an Auto-On feature. Refer to hood installation instructions for specific hood clearances.

The surface of the entire back wall above the countertop and below the hood must be covered with

a non-combustible material such as metal, ceramic tile, brick, marble or other stone.

27-1/2” to		Universal Utility Locations
Front of
Bullnose
	Locate gas	2”
		17”
	inlet on back
8-1/2”
	wall or on	16”
Height
	floor 2” from
	back wall.

48” Minimum
	12” Minimum to
to Combustibles
	Adjacent Wall

Non-combustible	12” Minimum	7/8”
material			2-1/2”
	Each Side

13” Max.

*48”

18” Min.

46-1/4”

22-3/4” Min. 8”

48”

*The opening between a 4” high backsplash must be 48” to allow the rangetop to slide back against the wall.

ADDITIONAL CLEARANCES:

Allow 12" minimum clearance to an adjacent wall on each side.

Working areas adjacent to the rangetop should have 18" minimum clearance between countertop and the bottom of the wall cabinet.

12” Minimum to Combustibles or 0” to non-combustible material above the cooking surface

48” Min. to

Combustibles

0” Clearance

4