GE PRODUCT DIMENSIONS AND CLEARANCES FOR 36” MODELS

Design Information

PRODUCT DIMENSIONS AND CLEARANCES FOR 36” MODELS

Universal Utility Locations

35-7/8”Width	27-1/2” to
	Front of
	Bullnose

	Locate gas	2”
			17”
	inlet on back
	wall or on			16”
8-1/2”
	floor 2” from
Height
	back wall.

WARNING:

Installations without a hood

require 48" minimum to combustibles above the rangetop. A custom hood installation with exposed horizontal combustible surfaces must have

an Auto-On feature. Refer to hood installation instructions for specific hood clearances.

The surface of the entire back wall above the countertop and below the hood must be covered with

a non-combustible material such as metal, ceramic tile, brick, marble or other stone.

13” Max.

18” Min.

48” Minimum

to Combustibles12” Minimum to Adjacent Wall

Non-combustible	12” Minimum	1/2”	2-1/2”
material	Each Side

*36”

35”

22-3/4” Min. 8”

36”

*The opening between a 4” high backsplash must be 36” to allow the rangetop to slide back against the wall.

ADDITIONAL CLEARANCES:

Allow 12" minimum clearance to an adjacent wall on each side.

Working areas adjacent to the rangetop should have 18" minimum clearance between countertop and the bottom of the wall cabinet.

12” Minimum to Combustibles or 0” to non-combustible material above the cooking surface

48” Min. to

Combustibles

0” Clearance

5