![](/images/new-backgrounds/1193609/19360955x1.webp)
IP CONTROL
The GefenPRO 16x16 3GSDI Matrix supports
The IP control setting can be configured via the
View Matrix Status
The Main Page will display the current status and can also be used to create routes.
To create a new route, follow the steps below:
1.Select which outputs will display the source by clicking on each check box.
2.Select the radio button of the input that will be routed to each output.
3.Click the SWITCH button to update the new routing configuration.
This page will automatically refresh every minute. However, at anytime the “Refresh” button can be pressed to refresh the status of the Matrix.
25