IR Remote Description | Gefen GEF-3GSDI-16416 instruction

IR REMOTE DESCRIPTION

RMT-16416IR

Remote Control Unit

1

2

1Activity Indicator

This LED will be activated momentarily each time a button is pressed.

2Display and Source Selection Buttons (1 - 16)

These buttons are used to select which source is routed to a monitor.

Routing sources using the Remote Control unit

Issuing a routing command is a two step process. The ﬁrst step is to select the monitor (1-16) to which the source will be routed. The second step is to select the source (1-16).

Example:

Route the source device connected to In 6 to the monitor connected to Out 4.

1.Press button 4 (Out 4) on the IR remote control unit.

2.Press button 6 (In 6) on the IR remote control unit.

The source connected to In 6 will be routed to the monitor connected to Out 4.

13

Image 16

Gefen GEF-3GSDI-16416 user manual IR Remote Description, RMT-16416IR Remote Control Unit

Contents

16x16 3GSDI Matrix Asking for Assistance Technical SupportTechnical Support Hours Write To Contents Introduction GefenGefen 16x16 3GSDI Matrix How It Works Operation Notes Features FeaturesPackage Includes Panel Layout Front Panel Panel Descriptions LCD Display Back Panel 3G-SDI Output Ports 1 Connecting and Operating the 16X16 3GSDI Matrix How to Connect the 16x16 3GSDI MatrixHow to Operate the 16x16 3GSDI Matrix Wiring Diagram for the GefenPRO 16x16 3GSDI Matrix Standby Screen Displaying the Boot Loader VersionDisplaying the Firmware Version RS-232 Switching between RS-232 and RS-485 ProtocolsRS-485 Connecting and Operating the 16X16 3GSDI Matrix Displaying the Routing Status Routing Sources Routing sources using the Remote Control unit RMT-16416IR Remote Control UnitIR Remote Description Installing the RMT-16416IR Battery IR Remote InstallationBattery Slot IR Remote Configuration How to Resolve IR Code Conﬂicts How do I use these features? RS-232 Serial Interface RS-232 Features RS-232 Serial ControlFunctions Syntax #CHECKREF Function #PRREFTABLE Function #ISPADD Function #SNETMASK Function #SGATEWAY Function #SPORT Function #PRWEBADD Function #FADEFAULT Function #ACTIVEBOLO Function #RMTIRADD Function #RSTIP Function Commands Command Description Command RS-232 Serial Commands Param1 IP Control View Matrix Status Masking IP Conﬁguration Backup / Restore Firmware Update Firmware Update Procedure Gefen 3GSDI Matrix System Failure System failure Rack Mount Safety Information Specifications BNC Warranty Product Registration Licensing Rev A3 Nordhoff St., Chatsworth CA