PANEL DESCRIPTIONS
Sender Unit
1Pairing button
Press and hold this recessed button using a paper clip for approximately 3 seconds to pair the Sender unit with the Receiver unit.
2Link
This LED indicator will glow bright blue once a link is established between the Sender unit and the Receiver unit.
3Video
This LED indicator will glow bright blue once a video link is established between the Sender unit and the Receiver unit.
4IR
Connect the included IR Emitter to this port and place it near the IR sensor of the source device* to be controlled.
5HDMI In
This input will accept a single HDMI source device.
6Power
Connect the included 5V DC power supply to this receptacle.
Receiver Unit
1Pairing button
Press and hold this recessed button using a paper clip for approximately 3 seconds to pair the Sender unit with the Receiver unit.
2IR Sensor
Receives IR commands from the included IR Remote Control unit and the IR remote of the source unit to be controlled.
3Link
This LED indicator will glow bright blue once a link is established between the Receiver unit and the Sender unit.
4Video
This LED indicator will glow bright blue once a video link is established between the Receiver unit and the Sender unit.
5USB
6HDMI Out
Connect the included HDMI cable from this connector to an HD display.
7Power
Connect the included 5V DC power supply to this receptacle.
*Please see www.gefentv.com for a list of compatible brands and models.
8
