OPERATING THE WIRELESS FOR HDMI
Renaming Sources
By default, each Sender unit is assigned the name “Sender”. This can be confusing when multiple Sender unit are used. However, this identifier can be changed to reflect, for example, the source to which each Sender unit is connected.
1.Point the IR Remote Control at the Receiver unit, press the MENU button, select Modify Video Source Name, then press the OK button.
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
2.Select the source to rename from the menu by using the cursor keys:
Choose Source to Rename
Sender
Sender
15