OPERATING THE WIRELESS FOR HDMI
Disconnecting the Wireless Link
The Wireless for HDMI network can be completely disconnected, if necessary. This can be used in order to restrict the source from being viewed.
1.Point the IR Remote Control at the Receiver unit and press the MENU button.
2.Select Disconnect Wireless Link and press the OK button.
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
3. After a few seconds, the screen will go blank. A status message, indicating that the wireless has been turned off, will be displayed. The Wireless for HDMI network is now in standby mode
Wireless Off
24
