OPERATING THE WIRELESS FOR HDMI
Using Multiple Sender Units
The Wireless for HDMI can be used with up to eight Sender units to provide switching capability between Sender units.
Wireless for HDMI R
Figure 1: Receiver unit with multiple Sender units
| HDMI S | Wireless for HDMI S |
HDMI S | Wireless for |
|
Wireless for |
|
|
Adding a new Video Source
Before adding an additional Sender unit to the Wireless for HDMI network, make sure that a single Sender / Receiver pair function correctly.
1.Connect the Sender unit to a
2.Connect the power supply to the Sender unit.
3. Point the IR Remote Control at the Receiver unit and press the MENU button. The Setup menu will be displayed.
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
12
