Table of Contents
Introduction | Inside Front Cover | |
Read This Manual Thoroughly | IFC | |
Contents | IFC | |
Operation and Maintenance | IFC | |
How to Obtain Service | IFC | |
Authorized Dealer Locator Number | IFC |
Safety Rules | 2 | ||
Standards Index | 3 | ||
Section 1 – General Information | 4 | ||
1.1 | Unpacking/Inspection | 4 | |
1.2 | Protection Systems | 4 | |
1.3 | System Set LED | 4 | |
1.4 | Accessory Features | 4 | |
| 1.4.1 | 12 Volt DC Outlet | 4 |
| 1.4.2 | 120 Volt AC Outlet | 5 |
1.5 | The Generator | 5 | |
1.6 | Specifications | 6 | |
| 1.6.1 | Generator | 6 |
| 1.6.2 | Engine | 6 |
1.7 | Fuel Requirements and Recommendations | 7 | |
1.8 | Fuel Consumption | 7 | |
1.9 | Reconfiguring the Fuel System | 7 | |
1.10 | Location | 7 | |
| 1.10.1 | Generator | 7 |
| 1.10.2 | Transfer Switch | 8 |
1.11 | Battery Installation | 8 | |
1.12 | The Battery | 8 | |
Section 2 – Post Installation |
| ||
|
| and Adjustments | 9 |
2.1 | Before Initial Startup | 9 | |
2.2 | Check Transfer Switch Operation | 9 | |
2.3 | Electrical Checks | 9 | |
2.4 | Generator Tests Under Load | 10 | |
2.5 | Checking Automatic Operation | 10 | |
2.6 | Voltage Regulator Adjustment | 11 |
Section 3 – Operation | 11 | ||
3.1 | 11 | ||
3.2 | Using the AUTO/OFF/MANUAL Switch | 11 | |
| 3.2.1 | “Auto” Position | 11 |
| 3.2.2 | “Off” Position | 12 |
| 3.2.3 | “Manual” Position | 12 |
3.3 | Automatic Transfer Operation | 12 | |
3.4 | Sequence of Automatic Operation | 12 | |
3.5 | Setting the Exercise Timer | 13 | |
3.6 | Protection Systems | 13 | |
| 3.6.1 Low Oil Pressure Switch | 13 | |
| 3.6.2 | High Temperature Switch | 13 |
| 3.6.3 | Overcrank | 13 |
| 3.6.4 | Overspeed | 13 |
| 3.6.5 | Low Battery | 14 |
Section 4 – Maintenance | 14 | ||
4.1 | System Fuse | 14 | |
| 4.1.1 | 7.5 Amp Fuse | 14 |
4.2 | Checking the Engine Oil Level | 14 | |
4.3 | Changing the Engine Oil | 14 | |
| 4.3.1 | Engine Oil Recommendations | 14 |
| 4.3.2 | Oil Change Procedure | 15 |
4.4 | Changing the Oil Filter | 15 | |
4.5 | Changing the Engine Air Cleaner | 15 | |
4.6 | Spark Plugs | 15 | |
4.7 | Battery Maintenance | 16 | |
4.8 | Adjusting | 16 | |
4.9 | Cooling System | 17 | |
4.10 | Attention After Submersion | 17 | |
4.11 | Corrosion Protection | 17 | |
4.12 | Out of Service Procedure | 17 | |
| 4.12.1 | Removal From Service | 17 |
| 4.12.2 | Return to Service | 18 |
4.13 | Service Schedule | 19 |
Section 5 – Troubleshooting | 20 | |
5.1 Troubleshooting Guide | 20 | |
Section 6 | – Installation Diagram | 21 |
Section 7 | – Electrical Data | 22 |
Section 8 | – Exploded Views and |
|
| Parts Lists | 26 |
Section 9 | – Notes | 38 |
Section 10 – Warranty | 40 |
1