First Edition • Third Printing | Operator's Manual |
|
|
|
|
Pre-operation Inspection
oBe sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
oBe sure that all decals are legible and in place. See Decals section.
oCheck for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
oModels with engines: Check for engine oil leaks and proper fluid level. Add oil if needed. See Maintenance section.
oCheck for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
oCheck for proper tire pressure and lug nut torque. Add air to tires if needed. See Maintenance section.
Check the following components or areas for damage, modifications and improperly installed or missing parts:
oElectrical components, wiring and electrical cables
oHydraulic pump(s), reservoir, hoses, fittings, cylinders and manifolds
oFuel tank (if equipped)
oEngine and related components (if equipped)
oBoom components and wear pads
oTires and wheels
oTrailer lights and reflectors
oParking brake components
oOutriggers and foot pads
oAlarms and horn
oNuts, bolts and other fasteners
PRE-OPERATION INSPECTION
oPlatform entry
oSurge brake components (if equipped)
oSafety chains (if required)
oMechanical brake components (if equipped)
oBeacon and alarms (if equipped)
Check entire machine for:
oCracks in welds or structural components
oDents or damage to machine
oBe sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.
oBe sure that the machine is properly configured for use.
Personnel lifting configuration: Be sure the platform is properly installed.
Material lifting configuration: Be sure the material lifting hook is properly installed.
oBe sure that the batteries are in place and properly connected.
oModels equipped with hydraulic surge brake systems: Check the hydraulic oil level in the surge brake. Check for leaks.
oAfter you complete your inspection, be sure that all compartment covers are in place and latched.
Part No. 72896 | Genie | 13 |
