Operator’s Manual | Genie Z-80, Z-60 instruction

Operator’s Manual	First Edition
Operator’s Manual	Third Printing
with Maintenance Information	Part No. 82258

Image 1

Genie Z-80, Z-60 manual Operator’s Manual

Contents

Operator’s Manual Contact us Contents Do Not Operate Unless Safety Rules Tip-over Hazards Electrocution Hazards Safety Rules Collision Hazards Fall Hazards Explosion and Fire Hazards Component Damage Hazards Bodily Injury Hazard Damaged Machine HazardsDecal Legend Ground Control Panel Controls Platform Control Panel 2221 Fundamentals Pre-operation Inspection PRE-OPERATION Inspection Pre-operation Inspection Observe and Obey MaintenanceCheck the Engine Oil Level Deutz F4L 913 Engine Engine oil viscosity requirements Check the Hydraulic Oil Level Check the Batteries Scheduled MaintenanceCheck the Engine Coolant Level Liquid Cooled Models At the Ground Controls Function TestsTest Emergency Stop Test the Machine Functions Test the Tilt Sensor Test Auxiliary ControlsTest the Operating Envelope At the Platform Controls Test the Steering models with 2 wheel steer Test the Steering models with 4 wheel steer Test Drive and Braking Test the Drive Enable SystemTest the Oscillate Axle Oscillating axle-equipped models Test Limited Drive Speed Workplace Inspection Workplace Inspection Starting the Engine Operating InstructionsEmergency Stop Only use the machine as it was intended Operation from Ground Auxiliary ControlsOperation from Platform Engine Idle Select rpm Drive EnableTo Drive Regulated Generator if equipped Check Engine Light Operating Envelope Indicator LightsStopping the Engine After Each Use Decal Inspection Decals Decals Transport and Lifting Instructions Free-wheel Configuration for Winching Securing the Chassis Securing to Truck or Trailer for TransitSecuring the Platform Turntable Chassis Lifting Point Points Lifting Instructions 80/60 Specifications 80/60 Range of Motion +34