First Edition · Third Printing | Operator's Manual |
|
|
|
|
Auxiliary Controls
Use auxiliary power if the primary power source (engine) fails.
1Turn the key switch to ground or platform control.
2Pull out the red Emergency Stop button to the on position.
3Press down the foot switch when operating the auxiliary controls from the platform.
4Simultaneously hold the auxiliary power button and activate the desired function.
Machines equipped with the auxiliary power drive option: The drive function will operate.
Operation from Ground
1Turn the key switch to ground control.
2Pull out the red Emergency Stop button to the on position.
3Gasoline/LPG models: Choose fuel by pressing the fuel select button.
4Start the engine.
To Position Platform
1Push and hold a function enable/ speed select button.
2Push the appropriate function button according to the markings on the control panel.
Drive and steer functions are not available from the ground controls.
OPERATING INSTRUCTIONS
Operation from Platform
1Turn the key switch to platform control.
2Pull out both ground and platform red Emergency Stop buttons to the on position.
3Gasoline/LPG models: Choose fuel by pressing the fuel select button.
4Start the engine. Do not press down the foot switch when starting the engine.
To Position Platform
1Press down the foot switch.
2Slowly move the appropriate function control handle or toggle switch or press the appropriate button according to the markings on the control panel.
To Steer
1 Press down the foot switch.
Models with 4 wheel steer:
2Select the steer mode by pressing a steer mode button. The indicator light next to the current steer mode will be on.
All models:
3 Slowly move the drive/steer
control handle in the direction indicated by the blue or yellow
triangles OR press the thumb rocker switch located on top of the drive control handle.
Use the
Part No. 82258 | Genie | 23 |
