Operator's Manual | First Edition · Third Printing |
|
|
|
|
SAFETY RULES
Do not place or attach overhanging loads to any part of this machine.
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition and lug nuts are properly tightened.
Fall Hazards
Occupants must wear a safety belt or harness in accordance with governmental regulations. Attach the lanyard to the anchorage point provided in the platform.
It is recommended that operators wear an approved hard hat when operating the machine.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Lower the platform entry
Collision Hazards
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of boom position and tailswing when rotating the turntable.
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazards when grasping the platform guard rail.
4 | Genie | Part No. 82258 |
