Genie Z-80, Z-60 Engine Idle Select rpm, To Drive, Drive Enable, Regulated Generator if equipped

Operator's Manual First Edition · Third Printing

OPERATING INSTRUCTIONS

To Drive

1Press down the foot switch.

2Increase speed: Slowly move the drive/steer control handle in the direction indicated by the blue or yellow arrows.

Decrease speed: Slowly move the drive/steer control handle toward center.

Stop: Return the drive/steer control handle to center or release the foot switch.

Use the color-coded direction arrows on the platform controls and the drive chassis to identify the direction the machine will travel.

Machine travel speed is restricted when the boom is raised or extended.

Drive Enable

Light on indicates that the boom has moved past either circle-end wheel and the drive function is turned off.

To drive, push the drive enable button and slowly move the drive/steer control handle off center.

If the drive/steer control handle is not moved within two seconds of pushing the drive enable button, the drive function will not operate. Release and push the drive enable button again.

Be aware that the machine may move in the opposite direction that the drive and steer controls are moved.

Always use the color-coded direction arrows on the platform controls and the drive chassis to identify the direction the machine will travel.

Regulated Generator (if equipped)

To operate the generator, press the generator button. The indicator light will come on and the engine will continue to run.

Plug power tools into the power to platform GFCI outlet.

To turn off the generator, push the generator button. The indicator light will turn off.

Engine Idle Select (rpm)

Select the engine idle (rpm) by pressing the select button. The indicator light next to the current setting will be on.

·Rabbit and foot switch symbol: foot switch activated high idle

·Turtle symbol: low idle

·Rabbit symbol: high idle

24 Genie Z-80/60 Part No. 82258