Using the ADF (Auto Document Feeder)

The Auto Document Feeder (ADF) is a special unit which comes preinstalled on the scanner lid and can hold up to 15 pieces of paper which will be automatically fed into the scanner.

With this ADF, you can scan up to 15 pages of documents or images at one time, making large scanning tasks easier.

 

Since the ADF was largely designed for scanning text documents, it is

 

limited to B/W or Gray scans. Likewise, the scanning resolution setting for

 

ADF scanning is limited to 200 to 600 dpi.

Attention

Please remove any documents from the ADF tray if you are attempting to

use the flatbed portion of this scanner. Leaving a document on the ADF

 

tray will cause the scanner to scan that document instead of your

 

intended flatbed source.

To Use the ADF:

1.Snap the paper tray on the top of the scanner open and lift it all the way to the top.

Lift up the paper tray.

Paper Input Tray

Paper Width Slider

Paper Output Tray

Figure 7. Automatic Document Cover

2.If you are loading long sheets of paper into the ADF, slide the extension arm to its upright

Genius ColorPage-HR6A Scanner

16

Page 18
Image 18
Genius HR6A manual Using the ADF Auto Document Feeder, ADF scanning is limited to 200 to 600 dpi, Intended flatbed source