English
1-2 Feature Summary
CPU | | Supports the latest Intel® Pentium® 4 LGA775 CPU |
| |
| | Supports 1066/800/533MHz FSB | ||
| L2 cache varies with CPU | |||
Chipset | | Northbridge: Intel® 925XE Express Chipset |
| |
| | Southbridge: Intel® ICH6R | ||
Memory | | 6 | DDR II DIMM memory slots (supports up to 4GB memory) (Note 1) |
|
| Supports dual channel DDR II 711/600(Note 2)/533/400 unbrffered DIMM | |||
| Supports 1.8V DDR II DIMM | |||
Slots | | 1 | PCI Express x 16 slot |
|
| 3 PCI Express x 1 slots | |||
| | 2 | PCI slots | |
IDE Connections | | 1 | IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of |
|
|
| 2 | IDE devices | |
FDD Connections | | 1 | FDD connection, allows connection of 2 FDD devices |
|
Onboard SATA | | 8 | Serial ATA ports : |
|
|
| 4 ports from ICH6R controller (SATA0_SB, SATA1_SB, SATA2_SB, SATA3_SB); | ||
|
| 4 ports from SiI3114 controller (SATA0_SII, SATA1_SII, SATA2_SII, SATA3_SII) | ||
Peripherals | | 1 parallel port supporting Normal/EPP/ECP mode |
| |
| 1 serial port (COMA) | |||
| 11 USB 2.0/1.1 ports (rear x 4, front x 7 via cable) | |||
| 3 IEEE1394b ports (requires cable) | |||
| 1 front audio connector | |||
| | 1 | IR connector | |
| 1 PS/2 keyboard port | |||
| 1 PS/2 mouse port | |||
Onboard LAN | | Onboard Marvell 8001 chip (10/100/1000 Mbit) (LAN1) |
| |
| Onboard Broadcom 5751/5789 chip (10/100/1000 Mbit) (LAN2) | |||
| 2 RJ 45 ports | |||
|
|
|
| |
Onboard Audio | | ALC880 CODEC | ||
| Supports Jack Sensing function | |||
| Supports 2 / 4 / 6 / 8 channel audio | |||
| Supports Line In ; Line Out (Front Speaker Out) ; MIC ; Surround Speaker Out | |||
|
| (Rear Speaker Out) ; Center/Subwoofer Speaker Out ; | ||
|
| Side Speaker Out connection | ||
| | SPDIF In/Out connection | ||
| | CD In connection |
|
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup. (Note 2) To use a DDRII 711 memory module on the motherboard, you must install a 1066MHz FSB
processor and overclock in BIOS.
To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS.
- 10 - |