English

2-1

Standard CMOS Features

 

 

 

 

 

 

 

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 

 

 

 

 

Standard CMOS Features

 

 

 

Date (mm:dd:yy)

 

 

Wed, Oct 27 2004

Item Help

 

Time (hh:mm:ss)

 

 

 

22:31:24

 

Menu Level`

` IDE Channel 0 Master

 

[None]

 

Change the day, month,

` IDE Channel 0 Slave

 

 

[None]

 

year

 

 

 

 

 

 

 

 

<Week>

 

 

Drive A

 

 

 

[1.44M, 3.5"]

Sun. to Sat.

 

Drive B

 

 

 

[None]

 

 

 

 

Floppy 3 Mode Suport

 

[Disabled]

 

<Month>

 

Halt On

 

 

 

[All, But Keyboard]

Jan. to Dec.

 

 

 

 

<Day>

 

 

 

 

 

 

 

 

 

 

Base Memory

 

 

 

640K

 

1 to 31 (or maximum

 

Extended Memory

 

 

511M

 

allowed in the month)

 

Total Memory

 

 

 

512M

 

<Year>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1999 to 2098

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F3: Language

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

 

 

 

 

 

 

 

 

 

 

Date

 

 

 

 

 

 

 

 

The date format is <week>, <month>, <day>, <year>.

 

 

 

 

Week

 

The week, from Sun to Sat, determined by the BIOS and is display only

 

Month

 

The month, Jan. Through Dec.

 

 

 

 

Day

 

The day, from 1 to 31 (or the maximum allowed in the month)

 

 

Year

 

The year, from 1999 through 2098

 

 

 

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Device Setup. You can use one of three methods:

• Auto

Allows BIOS to automatically detect IDE devices during POST(default)

• None

Select this if no IDE devices are used and the system will skip the automatic

 

detection step and allow for faster system start up.

• Manual

User can manually input the correct settings.

Access Mode

Use this to set the access mode for the hard drive. The four options are:

 

CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

Landing Zone

Landing zone

Sector

Number of sectors

If a hard disk has not been installed, select NONE and press <Enter>.

GA-8AENXP-D Motherboard

- 32 -

Page 32
Image 32
Gigabyte GA-8AENXP-D user manual Time, IDE Channel 0 Master, Slave, Detection step and allow for faster system start up