
English
NV SATA Pri-Master RAID
Enables or disables RAID for the first SATA 3Gb/s connector (SATAII0). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled)
NV SATA Pri-Slave RAID
Enables or disables RAID for the second SATA 3Gb/s connector (SATAII1). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled)
NV SATA Sec-Master RAID
Enables or disables RAID for the third SATA 3Gb/s connector (SATAII2). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled)
NV SATA Sec-Slave RAID
Enables or disables RAID for the fourth SATA 3Gb/s connector (SATAII3). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled)
On-Chip IDE Channel0
Enables or disables the integrated IDE controller. (Default: Enabled)
IDE DMA transfer access
Enables or disables DMA (Direct Memory Access) mode for the IDE device(s). Disabled turns off DMA mode for the IDE device(s) and lets it operate in PIO (Programmed Input/Output) mode. (Default: Enabled)
NV Serial-ATA 1
Enables or disables the integrated SATA controller. (Default: Enabled)
IDE Prefetch Mode
Enables or disbales prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch buffer to enhance hard drive performance. (Default: Enabled)
USB Memory Type
Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base Memory (640K).
Onchip SATA Mode (nVIDIA® nForce 520 chipset)
Enables or disables RAID for the SATA controllers integrated in the nVIDIA® nForce 520 chipset.
IDE | Configures the SATA controllers to PATA mode. (Default) |
AHCI | Configures the SATA controllers to AHCI mode. Advanced Host Controller |
| Interface (AHCI) is an interface specification that allows the storage driver to |
| enable advanced Serial ATA features such as Native Command Queuing and |
| hot plug. |
RAID | Enables RAID for the SATA controllers. |
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party
Onboard LAN Control
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party
- 40 - |