Go-Video VR3840 manual Disc Settings, Auto Chapter, Disc Initialize, Setup

Press SETUP.

The Setup menu appears.

Initial Setup (Continued)

Auto Chapter

During recording, chapter markers are added automati- cally at fixed intervals. You can set this interval to 5 min- utes or 10 minutes. To turn off automatic chapter mark- ing, select “OFF”.

DISC Settings

Disc Initialize

When you load a blank disc, the recorder will initialize the disc.

DVD-R:The recorder initializes the disc in Video mode. The Record mode will always be Video mode.

& SETUP

Disc Record Mode

VCR Record Mode

DV Record Audio

Auto Chapter

OFF

DVD-RW:You will be prompted to initialize the disc in Video mode (for maximum compatibility) or VR mode (for maximum editing ability).

Also, you can format the disc from the Setup menu as

5 Min

10 Min

Prev. Select Close

shown below.

Disc Initialize Start

Disc Finalize

Disc Label

Disc Protect

PBC

AutoPlay

YourDVD

Prev. Select Close

1

2Use v / V to select the DISC option.

3 While the DISC option is selected, press B to move to the second level.

4Use v / V to select the Disc Initialize option.

Press B to move to the third	level.
5 The Start icon is highlighted.

6The Disc Initialize menu appears.Press ENTER.

7desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER.If the disc is a DVD-RW, use b / B to select the

Disc Initialize

Select a mode.

VR Mode Video Mode

Caution

If you change the disc format, everything recorded on the disc will be erased.

CONNECTIONS

25