3
3.4
3.5
OPERATING THE EIDOS 19
SWITCHING ON
After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the remote control to switch the player on. Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
You can also use the OPEN/CLOSE button to switch on the player and open the disc tray at the same time.
This player features a screen saver. If the player is stopped or paused and no button is pressed for five minutes, the screen saver starts.
FIRST CONNECTION
When you switch on the player for the first time, you should see a welcome screen displayed on your TV. From here you can set up the language and the kind of TV you have, then either use the Setup Navigator to make more settings, or jump right in and start playing some discs.
Before continuing, make sure that you’ve loaded the batteries in the remote control.
GUIDE RETURN
ENTER
1 Use the (cursor up/down) buttons to choose a language, then press ENTER.
2 Press ENTER to move on to the next screen.
3 Use the (cursor left/right) buttons to select either ‘Wide screen (16:9)’or ‘Standard size screen (4:3)’ according to the kind of TV you have, then press
ENTER.
4 Press ENTER again to finish setting up.
Select Back then press ENTER if you want to go back and change the setting you just made.
User manual - GOLDMUND EIDOS 19 Universal Player P 14
