7.Orient the Crossbar (5) with the warning decal in the position shown. Attach the Crossbar to the Left Upright (3) with two M8 x 90mm Bolts (48), two M8 Washers (63), and two M8 Nylon Locknuts (64). Do not tighten the Locknuts yet.
Attach the Crossbar (5) to the Right Upright (not shown) in the same manner.
8.Press a 45mm Square Inner Cap (34) part way into the Front Leg (12). Attach two Base Feet (27) to the Front Stabilizer (11) with four M4 x 16mm Screws (57).
Attach the Front Stabilizer (11) to the Front Leg (12) with two M8 x 95mm Bolts (65) and two M8 Nylon Locknuts (64). Do not tighten the
Locknuts yet.
9.Tighten the Adjustment Knob (69) into the Seat Adjustment Tube (72). Pull the Knob out as far as it can go and slide the Adjustment Tube onto the Bench Frame (8). Tighten the Knob into one of the adjustment holes in the Bench Frame.
7 |
|
|
Warning | 3 |
|
Decal |
| |
| 64 |
|
5 |
|
|
64 |
|
|
|
| 63 |
|
| 48 |
|
| 63 |
8 | 34 |
|
|
| |
| 12 |
|
| 64 |
|
| 65 |
|
27 |
|
|
|
| 27 |
57 |
|
|
| 11 |
|
| 57 | 57 |
9 |
|
|
| Adjustment |
|
| Holes |
|
69 | 8 |
|
|
| |
72 |
|
|
8
