4.Identify the Left Handrail (71), which is marked “Left.” Remove the tie from the 5/16" Cage Nut (33). If necessary, press the Cage Nut back into place.
Hold the Left Handrail (71) near the Left Upright (75). Insert the Upright Wire (70) through the bracket on the bottom of the Left Handrail. Then, pull the Upright Wire out of the end of the Handrail.
Attach the Left Handrail (71) to the Left Upright
(75)with three 5/16" x 1" Bolts (7) and three 5/16" Star Washers (8) as shown. Be careful not to pinch the Upright Wire (70). Start all three Bolts before tightening them.
Attach the Right Handrail (not shown) in the same way. Note: There are no wires on the right side.
5.Identify the Left Handrail Tube (98), which is marked “Left.”
Insert the Left Handrail Tube (98) into the top of the Left Handrail (71). Attach the Left Handrail Tube with two 1/4" x 1" Screws (9). Start both Screws before tightening them. Then, insert a Handrail Insert (69) into the top of the Left Handrail.
Attach the Right Handrail Tube (not shown) in the same way.
4 |
|
| Tie |
| 70 |
| |
|
| 33 | |
|
|
| |
71 |
|
| 7 |
|
| 8 | |
|
|
| 8 |
|
|
| 7 |
|
| 75 |
|
5 |
|
|
|
|
|
| 98 |
|
| 9 | 69 |
|
|
| |
| 71 |
|
|
9
