10.Attach the two Resistance Assemblies (54) to the Uprights (75, 76) with four 1/4" x 4 1/2" Screws (10), four 1/4" Flat Washers (11), and four 3/8" Star Washers (5) as shown. Do not overtighten the Screws.
Fully tighten the six 3/8" x 3 1/2" Screws (4) (only one side is shown).
11.Identify the Left and Right Upper Body Arms (100, 101). Remove and discard the two indi- cated screws (A) from the Arms.
Make sure that the Left Upper Body Arm (100) is positioned as shown. Insert the lower end of the Arm into the large hole in the Resistance Assembly (54). Insert an Upper Body Arm Insert
(55)into the lower end of the Left Upper Body Arm. Then, tighten a #10 x 3/4" Screw (26) into the Resistance Assembly. Do not overtighten the Screw.
Attach the Right Upper Body Arm (101) as de- scribed above.
10 |
|
|
|
75 | 5 | 54 |
|
10 |
|
|
|
|
|
| 76 |
11 |
|
| 54 |
|
|
| 10 |
|
|
| 5 |
|
|
| 11 |
|
|
| 4 |
11 |
|
|
|
|
| 26 | 55 |
| A |
| 54 |
100 |
|
| |
|
|
| |
|
|
| 26 55 |
|
|
| A |
|
|
| 54 |
| 101 |
| |
12
