LOCATION REQUIREMENTS AND CONSIDERATIONS
home page. Next, click on the word “Product Registration” located on the left side of the Warranty page and complete the forms in the manner indicated on the Product Registration page.
Product limited warranty certificates for models currently in pro- duction can be viewed at www.goodmanmfg.com or www.amana- hac.com. If your model is not currently in production or does not appear on the website, please contact your installing con- tractor or contact customer service at
Each product overview page contains a Product Warranty link; by clicking on it you will be able to view the limited warranty coverage for that specific product. To view warranty registration information, click on the Product Warranty text on the left navi- gation panel on the home page of each website. The Online Product Registration pages are located in this same section.
WARNING
TO PREVENT PROPERTY DAMAGE, PERSONAL INJURY OR DEATH DUE TO FIRE, DO NOT INSTALL THIS FURNACE IN A MOBILE HOME, TRAILER, OR RECREATIONAL VEHICLE.
PRODUCT DESCRIPTION
FEATURES
This furnace is a part of the ComfortNet™ family of products. The CTK01 ComfortNet thermostat kit allows this furnace to be installed as part of a digitally communicating system. The ComfortNet system provides automatic airflow configuration, enhanced setup features, and enhanced diagnostics. It also reduces the number of thermostat wires to a maximum of four. It may be also installed as part of a “legacy” system using a standard 24 VAC thermostat.
This product may also be installed with the ComfortNet ther- mostat and a
PRODUCT APPLICATION
This furnace is primarily designed for residential
This furnace can be used in the following
Schools,Officebuildings,Churches,Retailstores, Nursinghomes,Hotels/motels,Commonorofficeareas
In such applications , the furnace must be installed with the following stipulations:
•It must be installed per the installation instructions provided and per local and national codes.
•It must be installed indoors in a building constructed on site.
•It must be part of a ducted system and not used in a free air delivery application.
•It must not be used as a
•All other warranty exclusions and restrictions apply.
This furnace may be used as a construction site heater ONLY if the following conditions are met:
•The vent system is permanently installed per these installation instructions.
•A room thermostat is used to control the furnace. Fixed jumpers that provide continuous heating CANNOT be used.
•Return air ducts are provided and sealed to the furnace.
•A return air temperature range between 60ºF (16ºC) and 80ºF (27ºC) is maintained.
•Air filters are installed in the system and maintained during construction, replaced as appropriate during construction, and upon completion of construction are replaced.
•The input rate and temperature rise are set per the furnace rating plate.
•100% outside air is provided for combustion air requirements during construction. Temporary ducting can be used.
NOTE: Do not connect the temporary duct directly to the furnace. The duct must be sized for adequate combustion and ventilation in accordance with the latest edition of the National Fuel Gas Code NFPA 54/ ANSI Z223.1 orCAN/CSA B149.1 Installation Codes.
•The furnace heat exchanger, components, duct system, air filters and evaporator coils are thoroughly cleaned following final construction clean up.
•All furnace operating conditions (including ignition, input rate, temperature rise and venting) are verified according to these installation instructions.
NOTE: The Commonwealth of Massachusetts requires that the following additional requirements must also be met:
•Gas furnaces must be installed by a licensed plumber or gas fitter.
•A
•If the unit is to be installed in an attic, the passageway to and the service area around the unit must have flooring.
WARNING
TO PREVENT PROPERTY DAMAGE, PERSONAL INJURY OR DEATH DUE TO FIRE, DO NOT INSTALL THIS FURNACE IN A MOBILE HOME, TRAILER, OR RECREATIONAL VEHICLE.
6
