Graco 24R200 operation manual Operation, Startup, Shutdown

Models: 24R200

1 28

Page 14

Operation

1.Turn the power on at the heated platen electrical enclosure.

2. Turn the power on at the heater power switch.

3.Set the desired temperature. Refer to page 5 for details.

1. Turn the power off at the heater power switch.

NOTE: If the entire machine is to be disconnected from electrical power, turn the power off at the heated platen electrical enclosure.

332511A

Image 14

Contents

332511A Heated Platen KitKit Instructions ExactaBlend AGP Advanced Glazing ProportionerRelated Manuals ContentsRelated Manuals Overview Power RequirementsWarnings System DescriptionFIG. 1 Heated Platen Kit Key Component IdentificationHeated Platen Kit Component IdentificationFIG. 2 Heat Controller Key Heat Controller701 Component IdentificationGrounding Installation1.Access the Platen 3.Connect the Ground Wires Installation 4. Connect the Power Leads5.Mount the RTD 3 “A” Leads 2 “B” Leads332511A 6. Attach the Platen CoversInstallation 7. Mount the Junction Box 10.Connect the Leads in the Junction Box 332511A 12.Connect Power to the Terminals and GroundInstallation NOTE Temperature is displayed in Fahrenheit Setup2. Turn the power on at the heater power switch Desired TemperatureShutdown OperationStartup FIG. 3 Remove Platen Covers and Heaters MaintenancePlaten Maintenance Problem TroubleshootingCommon Problems SolutionCause ProblemSolution VerificationFIG. 4 Replace Platen Heaters and RTD sensor R RepairReplace Platen Heaters and Sensor POWER SchematicSchematic 332511AFIG. 5 Heated Platen Kit PartsHeated Platen Kit, 24R200 Parts332511A FIG. 6 Heated Platen KitParts Quantity PartDescription Quantity PartDescription BRACKET, mount, topParts Heat Enclosure, 24R870FIG. 7 Heat Module 124 126 102 104 118 117118 FIG. 8 Heat ModuleQuantity PartDescription NUT, machine hex, M4-0.7Parts 332511AGraco Standard Warranty Graco Information