Graco 24R200 operation manual Attach the Platen Covers, Installation, 332511A

Models: 24R200

1 28

Page 9

Installation

To prevent damage to wires, ensure wires are not pinched when assembling and securing platen cov- ers.

NOTE: Torque the platen cover fasteners to

60+/- 10 in-lbs (6.8 +/- 1.1 N•m).

-(1) Conduit

-(1) Fastener

- (1) Fastener

- (1) Plug

- (2) Covers

332511A

Image 9

Contents

Kit Instructions Heated Platen Kit332511A ExactaBlend AGP Advanced Glazing ProportionerContents Related ManualsRelated Manuals Warnings Power RequirementsOverview System DescriptionHeated Platen Kit Component IdentificationFIG. 1 Heated Platen Kit Key Component Identification701 Heat ControllerFIG. 2 Heat Controller Key Component IdentificationInstallation 1.Access the PlatenGrounding 3.Connect the Ground Wires 5.Mount the RTD 4. Connect the Power LeadsInstallation 3 “A” Leads 2 “B” Leads6. Attach the Platen Covers Installation332511A 7. Mount the Junction Box 10.Connect the Leads in the Junction Box 12.Connect Power to the Terminals and Ground Installation332511A 2. Turn the power on at the heater power switch SetupNOTE Temperature is displayed in Fahrenheit Desired TemperatureOperation StartupShutdown Maintenance Platen MaintenanceFIG. 3 Remove Platen Covers and Heaters Common Problems TroubleshootingProblem SolutionSolution ProblemCause VerificationRepair Replace Platen Heaters and SensorFIG. 4 Replace Platen Heaters and RTD sensor R Schematic SchematicPOWER 332511AHeated Platen Kit, 24R200 PartsFIG. 5 Heated Platen Kit PartsFIG. 6 Heated Platen Kit Parts332511A Part DescriptionQuantity Description PartQuantity BRACKET, mount, topHeat Enclosure, 24R870 FIG. 7 Heat ModuleParts 118 117124 126 102 104 118 FIG. 8 Heat ModuleDescription PartQuantity NUT, machine hex, M4-0.7332511A PartsGraco Information Graco Standard Warranty