Setup
5.Turn on/off switch OFF and turn drain valve knob to
SPRAY.
ti10796b
6.Turn on/off switch ON, and run pump until a steady stream of material flows from material hose. Turn on/off switch to OFF and turn drain valve knob to
DRAIN.
ti13649a
7. Connect applicator to material hose.
ti21038a
Spray With Airless Tip
1. Install filter and tip extension.
ti13648a
2.Insert metal seat and OneSeal. Insert Switch Tip. Screw assembly onto applicator.
ti13650a
3.Turn drain valve to SPRAY, and turn on/off switch to ON. Turn pump control knob clockwise and/or adjust engine speed until desired material delivery rate is achieved.
ti8794a
4.Spray test pattern. Aim applicator at floor. Turn applicator switch ON and move applicator to spray surface.
ti21042a | ti13651a |
14 | 313888E |
