Cleanup
Cleanup
5. Base Coat Pump: Disconnect material hose from pump outlet.
1. Turn on/off switch OFF.
ti10796b
2.Perform Pressure Relief procedure, page 10.
3.Place pump in pail of clean water.
ti13644a
4.Shut OFF air if spraying with air. Remove applicator from material and air hoses.
ti14284a
ti21040a
ti13639a
6.Insert wet cleaning ball into hose (Base Coat Only). Connect material hose to pump outlet.
ti13643a
ti13638a
7. Hold material hose over waste pail.
ti13640a
8.Turn on/off switch ON and prime switch ON, or applicator switch on material hose.
ti10795b
18 | 313888E |
