Setup Mode Details
46 3A0869H
• Press to highlight the desired field. Press
to display the dropdown menu for that field.
Press to choose from the menu options and
to set. Press to move to the next field.
• Press to move through Configure 2 (Screen
19), Configure 3 (Screen 20), and Configure 4
(Screen 21).
NOTE: If you change system type (meter to pump),
number of guns, dosing type, or number of colors, a ver-
ification screen appears. Use to highlight and
press on the to make the change, or on the to
return to Configure 1 (Screen 18) without making a
change. If a change is made, the system locks so that
you cannot spray or mix. Power down and power back
up again to clear the lock and put the new settings into
effect. The lock ensures that the selection was intended,
and prevents the user from attempting to operate with
incorrect settings.
Configure 2 (Screen 19) allows users to set for each gun
the hose length (0.1 to 45.7 m, 0.3 to 150 ft) and hose
diameter (0.1 to 1 inch). The system uses this informa-
tion to calculate pot life volume. The pot life volume tells
the system how much material must be moved to trigger
a reset of the pot life timer. It also tells the system the
volume needed to fill during a load sequence. A change
in any of these fields will trigger the lock. See NOTE in
previous paragraph.
Configure 3 (Screen 20) allows users to set preferred
language (for optional USB Module), date format, date,
time, password (0000 to 9999), and number of minutes
(0 to 99) of inactivity required before the backlight turns
off. Configure 4 (Screen 21) allows users to set pre-
ferred units for distance and volume.
F
IG
. 38. Configure 1 (Screen 18)
F
IG
. 39. Confirm Change of System Type
Home
System
type
Dosing
type
Number
of guns
Gun flush
box
Number
of colors
F
IG
. 40. Configure 2 (Screen 19)
F
IG
. 41. Configure 3 (Screen 20) and Configure 4
(Screen 21)
Gun 1 hose
length
Gun 1 hose
diameter
Gun 2
hose
length
Gun 2 hose
diameter
Home
USB log
language
Password
Date
format
Date
Time
Home
Distance
units
Volume
units
Configure 3
Configure 4
Backlight
timer