5.1.2 5-Point Harness

1.Depress the harness adjustment button under the seat flap . Pull the shoulder straps out to loosen the harness.

2.Behind seat, remove the ends of the two

shoulder straps from the metal junction plate .

3.From front, pull straps through the harness slots and then reinsert them through the appropriate slots.

4.Behind seat, push both shoulder straps UNDER owner’s manual pocket and out the bottom.

5.Reassemble the strap ends onto the metal junction plate . Follow the appropriate instructions for a smaller or larger baby on the following page.

6.SAFETY CHECK:



Harness adjustment button



After the harness has been completely reinstalled,

a)CHECK that harness straps are not twisted in front or back.

b)CHECK that straps are secure by pulling on them.

27

Page 59
Image 59
Graco 6212, 6213 manual 2 5-Point Harness, Shoulder straps from the metal junction plate 