Technical Data
Technical Data
Category | Data |
|
|
Maximum Fluid Working Pressure | 2000 psi (14 MPa, 138 bar) |
|
|
Maximum Air Supply Pressure | 125 psi (0.9 MPa, 9 bar) |
|
|
Maximum Air Working Pressure | 80 psi (550 kPa, 5.5 bar) |
|
|
Pressure Ratio | 25:1 |
|
|
Air consumption with 02 tip at 1500 psi stall pres- | 28 scfm (0.8m3/min) |
sure |
|
Machine Maximum Power with hose | 9000 Watts |
|
|
Voltage Requirement (50/60 Hz) | 230 V, 1 Phase |
(230 V Nominal: | 230 V, 3 Phase (Delta) |
(380 V Nominal: | 380 V, 3 Phase (WYE 220 V to Neutral) |
|
|
Amperage Requirement (Full Load Peak)* | 40 amps @ 230 V, 1 Phase |
| 32 amps @ 230 V, 3 Phase |
| 18.5 amps @ 380 V, 3 Phase |
|
|
Maximum Heater Fluid Temperature | 190 °F (88 °C) |
|
|
Maximum Hose Fluid Temperature | 180 °F (82 °C) |
|
|
Maximum Ambient Temperature | 120 °F (49 °C) |
|
|
Maximum Output | 25 lb/min. (11.4 kg/min.) |
|
|
Output Per Cycle (A and B) | 0.025 gal/cycle (0.095 ltr/cycle) |
|
|
Heater Power | 6000 Watts |
|
|
Hose Power | 2790 Watts |
|
|
Sound Pressure (see NXT air motor manual) | 70.2 dB(A) |
|
|
Sound Power (see NXT air motor manual) | 80.1 dB(A) |
|
|
Viscosity Range | |
|
|
Maximum Fluid Inlet Pressure | 300 psi (2.1 MPa, 21 bar) or 15% of output pressure |
|
|
Fluid Inlet/Strainer Filter | 20 mesh standard |
|
|
Air inlet Filter Mesh | 40 Micron |
|
|
Component B (Resin) Inlet | 3/4 npt(f) swivel |
|
|
Component A (Isocyanate) Inlet | 3/4 npt(f) swivel |
|
|
Recirculation/Block Hose Connections | Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m) |
|
|
Maximum Heated Hose Length*** | 210 ft of 3/8 ID |
|
|
Weight | 310 lb (140.6 kg) |
|
|
Wetted Parts | Carbon steel, stainless steel, chrome, aluminum, |
| Fluoroelastomer, PTFE, nylon |
|
|
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used, but will have 25% less heat capacity.
3A1569B | 37 |
