Manuals / Graco / Baby / Car Seat

Graco PD247333A UNSAFE Vehicle Belt Systems, ‡ Lap Belts with Emergency Locking Retractor ELR

Models: PD247333A

1 68

Download 68 pages 8.79 Kb

Page 24

8.7 UNSAFE Vehicle Belt Systems

8.7 UNSAFE Vehicle Belt Systems

DO NOT USE ANY OF THE FOLLOWING SYSTEMS TO SECURE THE CHILD RESTRAINT. LATCH can be used IN PLACE OF the following unsafe belt systems if your vehicle is equipped with LATCH anchor points. Please refer to the vehicle owners manual for LATCH locations. NEVER USE unsafe belt systems.

Lap Belts with Emergency

Locking Retractor (ELR)

This lap belt stays loose and can move until it locks in a crash or sudden stop.

&RPELQDWLRQ/DS6KRXOGHU%HOWZLWK Retractor

Each strap has a retractor at one end and is attached to the latch plate at the other end.

Passive Restraint - Lap or Shoulder Belt Mounted on Door

24

Image 24

Graco PD247333A owner manual UNSAFE Vehicle Belt Systems, ‡ Lap Belts with Emergency Locking Retractor ELR

Contents

READ THIS MANUAL Child Restraint/Booster SeatOwner’s Manual Table of Contents Table of Contents cont 1.0 Warnings to Parents and Other Users 4. Properly routing the vehicle seat belt or LATCH 6. Properly securing your child in the child restraintGraco Children’s Products Inc Attn Customer Service 2.0 Registration InformationModel Number Date of Manufacture Purchase Date 2.1 Register Your Child Restraint2.3 If You Need Help 3.0 Useful Information 3.1&HUWLÀFDWLRQ3.2 Child Restraint Useful Life 3.3 Second Hand Child Restraint4.0 Features The locking clip is stored on the back of the child restraint. You will need to use it with certain types of vehicle seat belts 5.0 Assembling the Child Restraint Harness StrapCLICK 4. Attach 4 elastic loops from the seat pad underthe seat exactly as shown in Page 7. The assembly is now complete 6.0 WARNINGS ‡DO NOT INSTALL OR USE THIS CHILD‡12&+,/5675$,17&$1*8$5$17 ‡NEVER LEAVE YOUR CHILD UNATTENDEDDO NOT USE THIS child restraint without properly assembling it 7.0 Height and Weight Limitations 7.1 WITH Built-In Harnessis too large for built-in harness 7.2 WITHOUT Built-in Harness Your child must meet all requirements ‡HLJKWWROEV7.3 WITHOUT Back Support 8.0 Choosing an Appropriate Vehicle Seat Location IMPROPER PLACEMENT OF THE CHILD RESTRAINT8.1 Vehicle Seat Location Requirements INCREASES THE RISK OF SERIOUS INJURY OR DEATH8.2 Vehicle Seat Belt Requirements 8.3 SAFE Vehicle Seat Belt SystemsMANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CHILD RESTRAINT. THE VEHICLE SEAT BELT8.4 For Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALR8.5 With OR Without Built-in Harness When using booster seat WITHOUT the8.6 To Install Locking Clip repeat above steps until secure12” 1.25 cm 8.7 UNSAFE Vehicle Belt Systems ‡ Lap Belts with Emergency Locking Retractor ELR‡ Passive Restraint - Lap or Shoulder Belt Mounted on Door ‡ Passive Restraint Lap Belt with Motorized Shoulder Belt ‡ Lap Belts Forward of Seat CreaseDO NOT use these seat belts 9.0 LATCH 9.1 What is LATCH? Typical seat in a 9.2 LATCH System Vehicle Top Tether Child RestraintTop Tether Anchor Point10.0 Using Child Restraint WITH Built-in Harness FAILURE TO PROPERLY ADJUST THE HARNESS STRAPSFOR YOUR CHILD INCREASES THE RISK OF SERIOUS œ ž 3. Unbuckle harness straps œ5. The harness straps must go into the slots HYHQZLWKRUMXVWDERYHWKHVKRXOGHUV ŸIf straps are in proper slots go to page 6.7RDGMXVWKDUQHVVVWUDSVPage Harness strapsMUST go overPage 11.1 Using a Child Restraint WITH a Built-in Harness 11.0 Securing the Child Restraint in Your Vehicle11.2 With a Vehicle Lap or Lap/shoulder Belt Lower anchors must be stored when using vehicle belt6. Safety Check for Secure Installation 4. Tighten vehicle seat beltRFDWLRQS 11.3 With LATCH lay flat and not be twisted8. Safety Check for Secure Installation 12.0 Securing Your Child in the Child Restraint ‡Avoid bulky clothingFAILURE TO PROPERLY SECURE YOUR CHILD IN THE CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR3. Fasten harness clip š. Position harness armpitsFOLSDWPLGGOHRIFKLOG¶VFKHVWOHYHOZLWK 13.0 Harness Removal or Re-attaching Harness 1. Remove harness straps4. Grab the crotch strap buckle and pull it completely out œ Remove body support and crotch padPage Harness Strap Arm T-slotRepeat on other side 14.0 Using Your Child Restraint WITHOUT Built-in Harness FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CHILDRESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP ORINCORRECTINCORRECT INCORRECTINCORRECTINCORRECT INCORRECT ™ š › 15.0 Securing Child & Booster Seat in Vehicle16.0 Adjusting Head Support When using with or without the built-inharness 17.0 Removing or Re-attaching Back Support To use booster seat WITHOUT back1. Detach 2 lower elastic straps from rear of seat as shown ™ VXSSRUWUHPRYHKDUQHVVVWUDSVLIDWWDFKHG4. Move seat pad fabric out of the way and Page 18.0 Securing Child in Vehicle with Shoulder Belt Positioning Clip 3. NOTE Free end of strap œ should face front of seat REAR VIEW OF CHILD SITTING IN SEAT CORRECT 19.0 Using the Tether 19.1 Storing Lower Anchors and Tether LATCH 20.0 Airplane Use Important points to remember21.0 Accessories on certain models ONLY 21.1 Body Support & Harness Coversplacement of the chest clip at armpit level 21.2 Body Support & Harness Covers š ™ › 22.0 Recline Foot23.0 Care and Maintenance 23.1 Buckle Cleaning Process 3UHYHQWVHULRXVLQMXU\RUGHDWK24.0 To Remove or Re-attach Seat Cover BLEACH26.0 Replacement Parts and Warranty please contact us at the following