Accessories
Cleaning Brush 105749
For use in cleaning gun
Lubricant 111265
One 4 oz. (113 gram) tube sanitary
Fluid Whip Hose Assembly 239622
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Eases gun movement with increased hose flexibility.
4 ft. (1.22 m) long, 3/16 in. (4.76 mm) I.D., 3/8 npsm(fbe), nylon with polyurethane cover
Whip Hose Parts Breakdown
Part No. | Description |
|
|
239630 | FITTING ASSY, male |
|
|
239629 | FITTING ASSY, swivel |
|
|
061345 | TUBING; 1000 ft. (305 m) roll |
|
|
Fluid Hose Assembly
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure 3/16 in. (4.76 mm) I.D., 3/8 npsm(fbe), nylon with polyurethane cover
Part No. |
| Length |
|
|
|
239633 |
| 15 ft. (4.58 m) |
|
|
|
239634 |
| 25 ft. (7.63 m) |
|
|
|
Fluid Hose Parts Breakdown | ||
|
| |
Part No. | Description | |
|
| |
239629 | FITTING ASSY, swivel | |
|
| |
061345 | TUBING; 1000 ft. (305 m) roll | |
|
|
|
Air Hose Assembly
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure 5/16 in. (7.94 mm) I.D., 1/4 npsm(f) swivel, nitrile
Part No. | Length |
|
|
239636 | 15 ft. (4.58 m) |
|
|
239637 | 25 ft. (7.63 m) |
|
|
Air Whip Hose Assembly 239631
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Eases gun movement with increased hose flexibility.
4 ft. (1.22 m) long, 5/16 in. (7.94 mm) I.D., 1/4 npsm(f) swivel, nitrile
Air Hose Assembly 185353
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure Optional air hose for use when higher air flow is required. 25 ft. (7.625 m) long, 3/8 in. (9.53 mm) I.D., 1/4 npsm(f) swivel,
Air Control Valve Kit 243670
Install on the gun air inlet to control both the atomizing air and the pressure in the spray gun cup (if used). 1/4 npsm x
Air Pressure Verification Kit
For use in checking air cap atomizing or pattern air pressure at various supply air pressures. Not to be used for actual spraying.
Install the kit air cap on the gun. Turn on the air to the gun, then trigger the gun and read the air pressure on the gauge.
NOTE: To be “HVLP compliant”, the atomizing air pressure must not exceed 10 psi (70 kPa, 0.7 bar).
Part No. | Orifice | in. (mm) |
|
| |
239609 | 0.030, 0.042, 0.055 | |
| (0.762, 1.067, 1.397) | |
|
|
|
239610 | 0.070, 0.086 |
|
| (1.778, 2.184) |
|
|
|
|
239611 | 0.110 (2.790) |
|
|
|
|
239612 | gravity |
|
|
|
|
7637A
Gun Air Regulator Assy. 235119
NOTE: Installing the gun air regula- tor adds a pressure drop that could limit the air cap pressure.
7614A
Replaces the standard gun swivel fitting to prevent gun from rotating during operation
28 308741
