Selection Charts
HVLP Spray Gun and Pressure Cup Assemblies
Gun and Cup | Includes: |
|
|
| |
|
| |
Assy. Part No. | Gun Part No. | Cup and Reg- |
|
| ulator Part No. |
|
| 1 qt. (0.95 liter) |
239568 | 239560 | 239802 |
239569 | 239561 | 239802 |
239570 | 239562 | 239802 |
239571 | 239563 | 239802 |
HVLP Spray Gun and Gravity Cup | ||
Assemblies |
|
|
|
|
|
Gun and Cup | Includes: |
|
|
| |
|
| |
Assy. Part No. | Gun Part No. | Cup Part No. |
|
| 16 oz. (474 cc) |
239579 | 239574 | 239714 |
239580 | 239575 | 239714 |
Optional HVLP Air Caps |
| |
|
|
|
Air Cap Part | Pattern Type | Pattern |
No. |
| Length† |
|
| in. (mm) |
196107 | Shading/SAP | 6 (152) |
†measured with gun nozzle 10 in. (254 mm) from target surface
Selecting the Proper Needle/Nozzle Kit
The spray gun’s needle/nozzle kits range in size to provide different fluid flow rates.
As a general guideline, use the fluid nozzle that will give the required flow with the needle fully triggered at the lowest fluid pressure.
For low flow rates or light viscosity fluid, select the smaller nozzle sizes.
For high flow rates or high viscosity fluid, select the larger nozzle sizes.
NOTE:
DTo help select the proper needle/nozzle size, a fluid pressure gauge may be connected temporarily to the gun fluid inlet to determine the fluid pressure. See Accessories, page 28.
DSee page 17 for troubleshooting information.
