Daily Gun Care, Flushing, and Cleaning
WARNING
PRESSURIZED EQUIPMENT HAZARD
To reduce the risk of a serious injury whenever you are instructed to relieve pressure, follow the Pres- sure Relief Procedure on page 12.
CAUTION
Clean all parts with a
Methylene chloride with formic or propionic acid is not recommended as a flushing or cleaning solvent with this gun as it will damage aluminum and nylon components.
CAUTION
Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which may allow solvent into the gun air passages.
Do not point the gun up while cleaning it.
Do not wipe the gun with a cloth soaked in solvent; ring out the excess.
07042A
Do not immerse the gun in solvent.
07041A
02027
Do not use metal tools to clean the air cap holes as this may scratch them; scratches can distort the spray pattern.
02055
General System Maintenance
1.Relieve the pressure.
2.Clean the fluid and air line filters daily.
3.Check for any fluid leakage from the gun and fluid hoses. Tighten fittings or replace equipment as needed.
4.Flush the gun before changing colors and when- ever you are done operating the gun.
